- DT: Programmable at the full 200W Power
- ST: Programmable with Derating power
- Controls-Ready: (DT Models Only)
- Always-On Auxiliary Power: 12V, 200mA
- Dim-to-Off with Low Standby Power
- Dimming Controls:
- DT: 0-10V, PWM, Traditional Timer
- ST: Non-Dimming
- Input Surge Protection:
- 4kV DM, 6kV CM
- SELV Output
- TYPE HL, for use in a Class I, Division 2 Hazardous (Classified) Locations
- 5 Year Warranty
Life Time
120,000 hours @ Case Temperatue 60°C
Dimensions
Inches (L x W x H)
8.82 x 2.66 x 1.56
Millimeters (L x W x H)
224 x 67.5 x 39.5
Certifications
| Output Current | Input Voltage Range | Output Voltage Range | Max. Output Power | Model Number |
|---|---|---|---|---|
| 700 mA |
90 ~ 305 Vac |
142 – 286 Vdc |
200 W |
EUD-200S070DT(ST)-00A0 |
| 1050 mA | 95 – 190 Vdc | EUD-200S105DT(ST)-00A0 | ||
| 1400 mA | 71 – 142 Vdc | EUD-200S140DT(ST)-00A0 | ||
| 2100 mA | 47 – 95 Vdc | EUD-200S210DT(ST)-00A0 | ||
| 2450 mA | 41 – 82 Vdc | EUD-200S245DT(ST)-00A0 | ||
| 2800 mA | 35 – 71 Vdc | EUD-200S280DT(ST)-00A0 | ||
| 4200 mA | 24 – 48 Vdc | EUD-200S420DT(ST)-00A0 | ||
| 4900 mA | 21 – 41 Vdc | EUD-200S490DT(ST)-00A0 |
|
File Name
|
|---|
|
LED Driver Installation Instructions (Updated March 2015)
|
|
LED Driver Installation Guideline (Updated September 2018)
|
|
Programming Interface Device Driver Install First (Updated March 2015)
|
|
Design-In Guide for Programmable Drivers (Updated September 2018)
|
|
Programming Interface Installation Instructions (Updated April 2015)
|
|
Programming Interface Operating Instructions (Updated January 2016)
|
|
Inventronics Constant Power Programmer Manual Instruction (Updated April 2018)
|
